

Spot heating and cooling. Where you need it. Efficiently.
Planning a new room addition or have a problem room? Our largest split system can cool or heat up to 1,400 square feet. This makes it a great system for starter homes or to fix that annoying hot spot in your kitchen. There is no ductwork to run, and few electrical connections to make, so a contractor can typically install a system in less than a day.
More energy efficient.
A big benefit of Daikin Constant ComfortTM inverter technology is that continuous operation reduces your energy consumption – just as a car is more efficient traveling on a highway than it is in stop-and-go city traffic.

Some Daikin indoor units have an Intelligent Eye – an infrared sensor that automatically adjusts the temperature a few degrees when it senses you have left the room for more than 20 minutes. Simply by altering the temperature 3°F, this technology reduces energy usage by as much as 20% when cooling (and substantially more when heating).
You’ll feel the comfort difference. All day.
Daikin systems are smart systems. They do not abruptly stop and start in an annoying and futile attempt to maintain the set temperature. Instead, Daikin Constant ComfortTM inverter technology maintains the room’s desired temperature by making slight adjustments to the speed of the outside compressor based on information from the inside unit. Since a Daikin system runs continuously in most environments, you never feel too hot or too cold. Humidity is also kept in check because filtered air is always flowing.
Compact, split design.
A Daikin split system is similar to a conventional central air system in that an indoor unit is connected to an outdoor unit. What distinguishes Daikin’s design is the indoor unit is placed in the room and connected to the outside unit using piping and wiring that is run through a 3-inch-diameter hole. Often referred to as a “mini-split,” this is the most common form of cooling and heating system in the world.
The Power of Choice

FTKS

FTXS

RKS/RXS

RKS/RXS |
Our outdoor units are so compact and quiet that they can even be installed on a balcony. |
Duct-free system of choice.
In desirable destinations around the globe, smart consumers have long embraced duct-free systems because they save space, are energy efficient and offer superior comfort control. Another plus is they don’t block your view. That’s why Daikin is the leading brand of duct-free systems in more than 45 major countries around this big, beautiful world.
Precise temperature control—in the palm of your hand.
Daikin systems incorporate intelligent control technologies to make them more responsive to your desires. Most have a wireless remote controller that lets you change the room’s temperature or manage your personal preferences with the push of a button. Daikin remote controllers have so many bells and whistles they should jingle and toot when you pick them up (but they don’t…maybe next time).

Click image to enlarge. |
Controller’s features and aspect may change depending on the system selected. Ask your Daikin dealer for more details. |
Your neighbors will see the difference every day.
A Daikin system preserves the architectural integrity of your home and neighborhood. Our outdoor units are about the size of a suitcase and can be placed in an out-of-the-way location where they won’t detract from the beauty of your carefully cultivated hydrangeas. Unlike window units, a Daikin system complies with the restrictive covenants of most historic districts and homeowners associations.
Silent nights. And days.
A Daikin system does not “kick” on or off. It runs quietly in the background, making slight adjustments as needed. The outside unit isn’t as large and noisy as a conventional system because it contains an advanced compressor with fewer moving parts. At low speed, the unit’s sound level is less than that of a quiet office, and a special quiet mode reduces its sound output even further. That’s quiet enough that you could stand next to one and have a relaxed conversation – as you might when explaining to a neighbor why you love your new Daikin system.
Learn more about Daikin’s quiet operation.
Find a Daikin dealer in your area
Function:
- Cool and heat a single room up to 1,400 square feet
Design:
- Compact split design (“mini-split”)
- Duct-free or ducted indoor units
- Hand-held remote (or optional wired)
- Swing compressor for less friction and quiet operation
- Comfort and energy-saving features
Daikin Constant ComfortTM inverter technology:
- All-day comfort control
- Reduces energy consumption
- Quiet operation
Other benefits:
- Space-saving design
- Doesn’t block view
- Preserves architectural integrity
- Requires little time to install, which saves you money
Available functions & features*

Power-Airflow Dual Flaps
In heating and cooling mode, a small flap swings back and forth to circulate the air evenly. In heating mode, a large flap extends downward to force warm air toward the floor where it will naturally rise.

Wide-angle louvers
The innovative, curved design of these louvers provides wide airflow coverage no matter where the unit is placed in the room.

Vertical auto-swing
Distributes cool/warm air from ceiling to floor by moving flaps up and down.

Horizontal auto-swing
Distributes cool/warm air from side to side by moving louvers back and forth.

3-D Airflow
Delivers a stream of air to every corner of the room by combining the vertical and horizontal auto-swing patterns.

Comfortable Mode
Prevents air from blowing directly on your body by changing the angle the airflow is delivered at. Warm air is directed nearly straight down because it naturally rises, while cold air is pushed out at ceiling height.

Indoor Quiet operation
The operating sound level of the inside unit is decreased 3 dB below the “low” fan speed setting when this button on the remote controller is pressed. Some capacity might be lost as the airflow rate is reduced.

Outdoor Quiet operation
Pressing the “Quiet” button on the remote controller lowers the sound level of the outdoor unit by changing its frequency and fan speed.

Intelligent Eye
This is an infrared sensor that detects human movement. If you leave the room for more than 20 minutes, it adjusts the temperature by a few degrees to save energy. Savings of up to 20% when cooling and 30% when heating are possible.

Automatic Operation
Automatically selects cooling or heating mode at start-up. Intelligently switches between cooling and heating to maintain the set temperature.

Program Dry Function
Lowers humidity in the air without lowering the room temperature. Fan speed and temperature are controlled automatically.

Auto Fan Speed
The fan speed that best suits the thermostat setting and room temperature is automatically selected by the microprocessor. This helps save energy and minimizes operating sound.

Hot Start
Air is preheated to prevent uncomfortable cold drafts when heating operation first begins.

Mold-Proof Air Filter
Filter is infused with a nonhazardous, colorless and odorless mold preventive to make it virtually immune to mold growth.

Air purifying filter with photocatalytic deodorizing function
This filter combines an air-purifying filter and a photocatalytic deodorizing filter into one highly effective unit. It traps microscopic particles, decomposes odors and deactivates bacteria and viruses.

Titanium apatite photocatalyst
Activated by natural light, titanium apatite absorbs microscopic particles and breaks down organic contaminates such as bacteria and viruses into clumps of protein. It also eliminates odors.

Wipe-clean flat panel
Flat panel models have a groove-free surface that can be wiped clean with a single pass of a soft cloth. The panel can also be easily removed for a more thorough cleaning.

Econo Mode
Econo Mode reduces power consumption during start-up by nearly a third. In addition to saving energy, this reduces the demand on the electrical circuit when multiple devices are used simultaneously.

Powerful Operation
Pushing this button on the remote control boosts airflow to its maximum volume for a 20-minute period. After this, the unit automatically returns to its previous settings.

Remote Controller with backlit display
Controller has a backlit liquid crystal display and luminescent control buttons for easy use in dimly lit rooms.

LCD wireless remote controller
Smart design puts frequently used buttons at your fingertips for instant access while less-needed buttons are placed under the cover. A large liquid crystal panel makes it easy to see the settings.

Home Leave Operation
This function allows you to record an energy-efficient temperature and airflow setting, then recall it by pressing a button as you leave the house or go to bed. When you return home or wake up, press the button again to return to the normal setting. Your home will be warmed up or cooled down much quicker than if you had turned the system off.

Indoor unit On/Off switch
An easily accessed On/Off switch on the indoor unit allows you to start up the system should you misplace the remote controller or discharge its batteries.

24-hour On/Off timer
The timer can be set to start and stop at any point in a 24-hour period.

Night Set Mode
This feature gently raises or lowers the preset temperature to keep the air flowing and prevent you from feeling too hot or too cold as you sleep.

Auto Restart after Power Failure
The system resumes operating as it was before – operating mode, airflow volume, set temperature and timer settings are all restored.

Self-diagnosis with digital display
Malfunction codes are displayed on the wireless remote controller’s liquid crystal display for fast and easy diagnosis of any problems.

Anticorrosion Treatment of Outdoor Heat Exchanger Fins
An acrylic resin layer makes the fins five to six times more resistant to acid rain and salt corrosion. A hydrophilic film layer also prevents rust caused by the runoff of water droplets. A rustproof steel sheet on the bottom of the unit also enhances system durability.

Daikin Constant Comfort™ (inverter)
Daikin Constant ComfortTM inverter technology maintains the temperature you desire by making slight adjustments to the speed of the compressor. Since the system runs continuously in most environments, filtered air is nearly always flowing. This eliminates large temperature swings between operation cycles and helps keep humidity in check, making your home feel more comfortable.
*Available features and functions vary by unit.